8
FS5.3e Elliptical
#99
. 5/16” x 15mm
Hex Head Bolt (2 pcs)
#141
. 5/16” x 23 x 1.5T
Flat Washer (2 pcs)
#150
. 17mm
Wave Washer (4 pcs)
2
Hardware Step 2
1. Slide two Wave Washers (
150
) onto each side of the Swing Arm Axle.
Slide the Swing Arms (
10
Left,
11
Right) onto the axles and secure with
the two Hex Head Bolts (
99
) and Flat Washers (
141
). Do not force the
Swing Arms onto the axle. They should slide on, but you may need to
jiggle them to get them lined up properly. The Swing Arms have been
previously installed at the factory so they do fit properly.
Swing Arms