10
FS400 Elliptical
#78
. M5 x P0.8 x 10L
Phillips Head Screw
(4 pcs)
#79
. M5 x P0.8 x 15L
Phillips Head Screw
(6 pcs)
4
Hardware Step 4
1. Locate the Console Assembly (
31
) and the four Phillips Head Screws
(
78
) by using the Phillips Head Screw Driver (
110
).
2. There will be two electrical wire connectors at the top opening of the
Console Mast (
10
), two Handpulse W/Cable Assemblies (
37
), one Com-
puter Cable (
32
). Connect these to the mating connectors on the back
of the Console Assembly (
31
). The connectors are keyed so you cannot
plug them in the wrong way so do not force them.
3. Storing the excess wire back into the Console Mast (
10
), carefully install
the Console Assembly (
31
) onto the mounting plate of Console Mast (
10
)
and secure using the four Phillips Head Screws (
78
)
4. Install the 2pcs of Slide Wheel Covers (
52
) and the four Phillips Head
Screws (
79
) by using the Phillips Head Screw Driver (
110
).
5. Use one Phillips Head Screw (
79
) to secure Rear Stabilizer Cover (L)
(
61
) on the Rail Tube with Phillips Head Screw Driver (
110
). Repeat the
procedure for Rear Stabilizer Cover (R) (
62
) for the other side.
Plastic Covers
Note: Use the M5 Allen Wrench/Phillips Head Screw Driver (108) to tighten hardware in this step.
Содержание FS400
Страница 9: ...FS400 Elliptical 7 Console Mast Front Stabilizer 1 ...
Страница 23: ......
