Xterra FS400, Руководство пользователя

Страница: 21 / 24

FS400 Elliptical
19
1. Wipe down all areas in the sweat path with a damp cloth after each workout.
2. If a squeak, thump, clicking or rough feeling develops, the main cause is most likely one of
two reasons:
i. The hardware was not sufficiently tightened during assembly. All bolts that were
installed during assembly need to be tightened as much as possible. It may be
necessary to use a larger wrench than the one provided if you cannot tighten the bolts
sufficiently. The majority of calls to the service department for noise issues can be
traced to loose hardware or the rear rails being dirty.
ii. Dirt build-up on the rear rails and polyurethane wheels are also a source of noise.
Noise from build-up on the rails can cause a thumping sound that you would swear is
coming from inside the main body of the machine because noise travels and is am-
plified in the tubing of the frame. Clean the rails and wheels with a lint free cloth and
rubbing alcohol. Stubborn build-up can be removed with your
thumbnail or a non-metallic scraper, like the back edge of a plastic knife. After clean-
ing, apply a
small amount of lubricant on the rails with your fingers or a lint free cloth. You only
need a thin
coat of lubrication, wipe off any excess.
3. If squeaks or other noises persist, check that the unit is properly leveled before calling the
service department.
General Maintenance
Your new elliptical is engineered and manufactured to the strictest industry standards and
tolerances. All elliptical trainers, no matter who the manufacturer, have a multitude of mov-
ing linkages and parts. Be aware that even with the tightest mechanical tolerances there still
could be a slight amount of play between some parts. This inherent play can result in slight
noises during use such as clicks and small thumps. Please expect that the
elliptical will not be completely silent.
Elliptical Noises