5
Customer Service 1-888-707-1880 Dyaco Canada Inc. 2022
Email: [email protected]
IMPORTANT OPERATION INSTRUCTIONS
●
NEVER
operate this treadmill without reading and completely understanding the results
of any operational change you request from the computer.
●
Understand that changes in speed and incline do not occur immediately. Set your desired
speed on the computer console and release the adjustment key. The computer will obey
the command gradually.
●
NEVER
use your treadmill during an electrical storm. Surges may occur in your
household power supply that could damage treadmill components.
●
Use caution while participating in other activities while walking on your treadmill, such as
watching television, reading, etc. These distractions may cause you to lose balance or
stray from walking in the center of the belt, which may result in serious injury.
●
NEVER
mount or dismount the treadmill while the belt is moving. Treadmills start at low
speed, and it is unnecessary to straddle the belt during startup. Simply standing on the belt
during slow acceleration is proper after you have learned to operate the unit.
Always hold on to a handrail or hand bar while making control changes (incline, speed,
etc.).
Do not use excessive pressure on console control keys. They are precision set to function
properly with little finger pressure. Pushing harder is not going to make the unit go
faster or slower. If you feel the buttons are not functioning properly with normal pressure,
contact your dealer.
ASSEMBLY INSTRUCTIONS
!!ATTENTION: IMPORTANT UNPACKING INSTRUCTIONS.
PLEASE READ BEFORE UNPACKING YOUR FOLDING TREADMILL!!
Serious injury could occur if this folding treadmill is not unpacked properly.
There is a Velcro strap installed around the treadmill base that prevents the treadmill from
folding accidentally during shipping. If this strap is not removed properly, the treadmill could
spring open unexpectedly and cause injury if someone is standing near the treadmill when the
strap is removed.
To ensure your personal safety during the removal of the shipping strap, please make sure the
treadmill is positioned flat on the ground, in the orientation it would be in if you were using the
treadmill. Do not turn the treadmill up on its side while removing the shipping strap. This could
cause the treadmill's folding mechanism to spring closed. If the end of the Velcro strap (that you
need to grab to remove it) happens to be under the treadmill deck, reach under the deck to
grab it, but do not tilt the treadmill up to gain access to the strap end.
Unpack the treadmill and locate the hardware pack. The hardware pack contains tools and
hardware needed for the assembly of each step.