![background image](http://html1.mh-extra.com/html/unisen/star-trac-4500/star-trac-4500_manual_3936987001.webp)
Manager Mode
After having used you
Star Trac 4500 treadmill
for several workouts, you may wish to specially
customize your treadmill by changing some of its settings.
To engage Manager Mode:
1.
Press and hold the “ 0 ”, “ 1 ” & “ START ” keys together. While holding the “ 0 ” &
“ START ” keys down, release the “ 1 ” key only.
2.
The display will beep and display
Manager Mode
momentarily, then UNITS will be displayed.
Once the treadmill is in Manager Mode, you may use the following keys:
INCLINE KEY: Displays the next or previous parameter.
SPEED KEYS: Allows the variable to be changed within the parameter.
ENTER KEY: Saves the value if changed in the EPROM (software).
Note: ENTER KEY must be pressed, for each value changed.
STOP KEY: Exists Manager Mode and restarts the treadmill with a “warm start.”
0 – 9 KEYS: Enters new parameter values. If
UNITS
parameter is displayed, key
5
starts DISPLAY TEST and key
8
starts MOTOR TEST.
HEART
HEART KEY: When pressed will automatically display manufactures default value.
Note: ENTER KEY must be pressed, to save the default values if changed.
3.1