32
Customer Service 1-888-707-1880 Dyaco Canada Inc. 2022
Email: [email protected]
TREAD-BELT TRACKING ADJUSTMENT
The treadmill is designed so that the tread-belt remains reasonably centred while in use. It is normal for
some belts to drift near one side while in use, depending on a user's gait and if they favour one leg. But if
during use, the belt continues to move toward one side, adjustments are necessary.
SETTING TREAD-BELT TRACKING
A 6 mm Allen wrench is provided for this adjustment.
Make tracking adjustments on the left side bolt. Seat
belt speed at 3 mph. Be aware that a small
adjustment can make a dramatic difference which
may not be apparent right away.
If the belt is too close to the left side, then turn the
bolt only a 1/4 turn to the right (clockwise) and wait a
few minutes for the belt to adjust itself.
Continue to make 1/4 turns until the belt stabilizes in
the center of the running deck.
If the belt is too close to the right side, turn the bolt counter-clockwise. The belt may require periodic
tracking adjustment depending on use and walking/running characteristics. Some users may affect
tracking differently. Expect to make adjustments as required to center the tread belt. Adjustments will
become less of a maintenance concern as the belt is used. Proper belt tracking is an owner's
responsibility common with all treadmills.
ATTENTION:
DAMAGE TO THE RUNNING BELT RESULTING FROM IMPROPER TRACKING / TENSION
ADJUSTMENTS ARE NOT COVERED UNDER THE WARRANTY.