XtendLan XL-HDVR series, Руководство пользователя

Страница: 11 / 106

11
Operating Your DVR
There are numerous ways to navigate and operate your DVR. You may use the Front Panel Controls, the included IR
(Infra-Red) Remote , a Mouse and the Soft Keyboard .
Using the Front Panel Controls
Your DVR comes with built-in front panel controls, as shown in Figure 4.
Figure 4. DVR Front Panel Controls
The controls on the front panel include:
1. Power Button: Powers DVR on/off.
2. IR Receiver: Receiver for IR remote.
3. USB Ports: Universal Serial Bus (USB) ports for additional devices such as USB mouse and USB
Hard Disk Drive (HDD).
4. Status Indicators: Status indicators for different features of the DVR.
•
Alarm: Alarm indicator turns red when a sensor alarm is detected.
•
Ready: Ready indicator turns blue when DVR is functioning properly.
•
Status: Status indicator turns blue when DVR is controlled by an IR remote. Indicator turns red
when controlled by a keyboard and purple when IR remote and keyboard is used at the same time.
•
HDD: HDD indicator blinks red when data is being read from or written to HDD.
•
Modem: Reserved
•
TX/RX: TX/RX indictor blinks blue when network connection is functioning properly.
•
Guard: Guard indicator turns blue when the device is armed, off when the device is unarmed. The
arm/disarm state can be initiated by pressing and holding on the ESC button for more than 3
seconds in Preview mode.
5. Alphanumeric Buttons: Alphanumeric buttons used in various menus of the DVR. Some uses
include:
•
Switching to the corresponding channel in Preview or PTZ Control mode.
•
Inputting numbers and characters in Edit mode.
•
Switching between different channels in Playback mode.