EX-SDI DVR OPERATION MANUAL
- 18 -
`
Figure 1-16
[Preset]
settings: see picture preset settings, through direction button to turn the camera to the desired position, and
then press the
[preset]
button in the preset input box, enter the preset point values, clicking on the
[setting]
button to
save.
[Cruise]
settings: click the
[cruise]
button, as shown in the figure1-16, first enter the cruise value in the input box.
Again at the preset input box, enter the preset point values, click on the
[Add preset]
button, which is in the cruise
line adds a preset point. Multiple operating multiple preset points. Or click the
[Clear preset]
button, you can delete
the presets in the cruise line. Also multiple operations to remove more than already exists in the cruise line's preset
point (delete preset point function is part of the Protocol is not supported).
[Tour Traces]
settings: click [tour traces] button, as figure by shows, and will this a process records of for tour traces
x, again click
[page Switch]
button, then returned to PTZ control menu for
[Zoom]
, and
[Focus]
, and
[Aperture]
or
direction series of operation, then returned to Xia figure by shows menu, click
[End]
button.
[Linear Boundaries]
settings: click the [linear border] as shown in the figure, left boundary by selecting the camera
direction by linear sweep, and enter the menu as shown in the following figure, clicking on
[left Edge]
button, and
then through the direction buttons to select the camera to the right edge of line scan, and click on the
[right edge]
button, complete the set of line sweep course.
[Auxiliary]:
click on PIC of the
[page Switch]
to set accessibility (
[Auxiliary]
option in the protocol used with
corresponding), as shown in the figure. Secondary number corresponds to the
[auxiliary]
switch on the decoder.
Figure 1-17