XTEMP ENVIRONMENTS (SHANGHAI) CO., LTD.
http://www.xtemp-usa.com/
36
/
55
DSEO0711-2-V211119/UXP8401-PG.CC.GE.AR-CD7003/5~+45
℃
Chapter 3 Controller Descriptions and Operation
3
The equipment will terminate operation once program comes to the end of last
cycle. Once it is expected to terminate the operation of the equipment, tap [STOP/SET] any
time at the screen of HOME, which leads the screen of Termination as shown in Fig 12. Use
[Yes] to terminate immediately.
3.12 Schedule a program operation
At screen of Program list as in Fig 27, select the program number to be executed, for example 01,
tap [SCHEDULE] to plan a future program operation:
Fig 30
Follow procedures as in 3.9 and Fig 18 for schedule a constant operation, key in YYYY-MM-DD for
date, and HH-MM for time to start the program operation. Set the values and use [ENT] to
accept, or [CLR] to clear error or [ESC] to exit. Use [Copy date/time] for copying of the
current date and time.
Use [CAN] to cancel and [OK] to continue to the next page as shown in Fig 31:
Fig 31
