XTEMP ENVIRONMENTS (SHANGHAI) CO., LTD.
http://www.xtemp-usa.com/
22
/
55
DSEO0711-2-V211119/UXP8401-PG.CC.GE.AR-CD7003/5~+45
℃
Chapter 3 Controller Descriptions and Operation
3
off automatically. The light intensity of the operator light is the same as for safe
level as activated by door operation.
[SET/START]: To start the operation of circulating fan and control of temperature, humidity and
light as set in constant mode or program mode, or to set t working parameters or review
working details of the equipment.
3.3 Start the equipment operation
Tap [SET/START] to enter screen for constant operation or program operation (Fig 7). Select either
[CONSTANT] to screen Fig 8 or [PROGRAM] to screen Fig 21.
Use [ESC] to escape and come back to HOME (Fig 6, Fig 11).
Fig 7
3.4 Constant operation
Tap [CONSTANT] to enter screen for temperature, humidity, visual light and maximum radiation
limit (Fig 8). Touch the respective fields to pop up digital keypad to set target values. If the
value is not changed at [ENT], the data is not accepted for either lower than or higher than
the allowable range limit. Modify the data and confirm the input by [ENT].
Fig 8
