7. ENROLLMENT
8. CONFIGURING THE BIOMETRIC READERS IN PROS CS SOFTWARE
1.
Expand the Door item to view the readers
2. Right click on the reader and select properties (8.1)
3. I
n the Basic tab
, for “Type” of the Reader select “BIOPAD-M”. (8.2)
4. After selecting the type, a third tab will appear “Biometric”. Go to that tab and put the serial number of the Biometric
Reader. (8.3)
Important Note:
The serial number of the reader can be found on a sticker inside the reader, on the packaging box and it can
be search from the software (right click on the portal/search devices/readers). (8.4 & 8.5)
To check if the reader is On Line, right click on the reader and select “Check version”. In the Event Window a message should
appear “Device ON Line, Type: BIOPAD-M” (8.6)
BIOPAD-M
BIOC3
8.1
8.2
8.3
8.4
8.5
8.6
8.1 ADDING BIOMETRIC READER
8
www.visual-plus.com
