Plug
the Desktop Reader (B
IO
E)
in the PC. If the device is not installed automatically
us
e
the drivers located on the CD provided
with the Biometric reader. It is installed in the same way as a USB Device. When the desktop reader has been installed it will
automatically appear in the Software
. (8.13)
1. Open the Users Window and create a new user.
Click on “New User”, put a name, ID(card number) and Access Code. 8.7)
2. Go to the “Biometric” Tab
3. Select the USB desktop Reader (with left click).
4. Place the finger on the BIOE, right click on the fingertip and select enroll. (8.9)
5. T
he finger tip will turn
red
, with the percentage of successfu
l
enrollment shown next to the fingertip.
(8.10)
6. Repeat point 5 for each finger that should be enrolled.
7. Click on “Save New” and the fingerprint will be sent automatically to all Biometric Readers where that user has access, i.e. to all
the readers according to the Access Level assign to that user.
If the reader is off line, the fingers will be sent upon the connection is established between PROS server and the reader. No need for
additional enrollment or actions. The fingerprints will be sent as soon as communication is established.
Example:
If the user has “Unlimited” Access level then the fingerprints will be sent to all readers, if the user has Access level only for Reader1
and Reader 3 then the fingerprints will be sent only to those two readers.
Note:
To check if all the fingerprints are sent to the reader, right click on the reader and select “Memory Status”. (8.11)
In the event window a line will appear indicating the number of fingerprints stored in the reader. (8.12)
Note:
If more fingerprints are added for one user, all finger
s will send the same Wiegand Code to the controller
, the one written in
the field User ID(card Number).
8.10
8.11
8.12
8.3 ENROLLING FINGERPRINTS FROM DESKTOP READER
8.9
8.13
8.7
10
www.visual-plus.com
