9.3 DELETE READER
Right-click on the reader and select
Delete reader
9.4 C
ALIBRATE
SENSOR
9.5 ADD USER
Right-click on the reader and select
Calibrate
See the events panel to check the calibration flow
It is recommended to do sensor calibration once after reader is mounted. Clean the fingerprint sensor before calibration.
At user table, click on the last empty user field and enter user name
Click on ID (User code) field and enter ID number. This number will be sent by the reader to the access controller when user
finger is recognized by the reader
Click on PIN code field and enter the PIN. PIN code is used at readers with keypad. When PIN code is typed at reader, User ID
will be sent to the access controller
9.6 EDIT USER
Find the user at user table to edit
Click on the user field for edit (Name, ID or PIN)
Type new value
Press Enter on the keyboard
Important:
When ID is changed, warning message is displayed reminding that if ID exist in some reader, should be deleted from
reader prior to change.
www.visual-plus.com
18
