67 / 99
www.xovis.com
When pushing using FTP or SFTP/SSH, the server and login credentials need to be provided.
Optionally a directory can be specified. The following figure shows an example of validation
recording push configuration (only FTP/SFTP is supported for validation recording):
Figure 48: Example configuration for pushing validation recordings to remote destination
This setup will push validation recording sequences immediately, i.e. directly after a
sequence file is stored, to the FTP server with IP 10.10.10.88 using user “ftpuser” with
a
specified password. The recordings will be stored in the directory /sensor/00-1E-C0-DF-65-
D9/rec.
The password will never be displayed and will also be stored in an encrypted format on the
sensor. Once set, a password therefore cannot be looked up in plaintext anymore.
As with the count data push agent, connectivity can also be test
ed using the “test” button. If
the connection succeeds, a file with sample content will be stored on the FTP server. The
status message informs about this:
The sensor supports up to 8 data push agents. A configured data push agent can be removed
by click
ing on the “remove” button on the right side of every agent.
As with the whole config section, changes to the data push configuration are first applied
when pressing the “Save” button.
Содержание PC Series
Страница 1: ...PC Series User manual...