Xovis PC Series Скачать руководство пользователя страница 58

Страница: 58 / 99

58 / 99

www.xovis.com

3.2.10.1.1.

Save

The “Save” button applies all settings to the sensor. Depending on the changes made, th

e re-

initializing of the sensor after configuration changes can take up to 20 seconds.

While applying the settings and re-initializing the sensor, the web GUI is blocked with the
following indicator:

Figure 44: Configuration save indicator

Important: All changes made in the config view will first be applied to the sensor when

pressing the “Save” button.

3.2.10.1.2.

Discard changes

The „Discard changes“ button

discards all changes made since saving the last time.

Discarding the changes will prompt for a confirmation:

3.2.10.1.3.

Start setup wizard

The “start setup wizard” button allows to re

-start the setup wizard at any time. When clicking

this button, the user gets asked to choose to either start the wizard with the currently
applied settings or by first resetting the sensor to the factory-default configuration:

Содержание PC Series




































































































Результаты поиска

Содержание PC Series

Отзывы:

Похожие инструкции для PC Series

Бренды по названию

Популярные бренды

Xovis PC Series, Руководство пользователя

Результаты поиска

Содержание PC Series

Отзывы:

Похожие инструкции для PC Series

Бренды по названию

Популярные бренды