Xovis PC Series, Руководство пользователя

Страница: 43 / 99

43 / 99 www.xovis.com
The live view holds four main parts:
3.2.8.1 Scene live view
The “Scene” box holds the live view of the sensors scene. Configured count lines and count
zones are overlaid in the scene image. The monitoring can be controlled by the scene view
controls described in chapter 3.2.7.9.3.
When hovering over the count elements within the scene, the element gets hightlighted both
within the scene and within the “counts” list (mentioned in the next chapter). When clicking
on a specific element, it gets marked red both within the scene and within the “counts” list.
The blinking small green dot displayed in the upper left corner of the “Scene” box indicates
an intact connection to the sensor.
3.2.8.2 Live count states
The “Counts” box lists all configured count elements on the sensor, i.e. count lines and count
zones. For each count line the current values of their forward and backward counts are
displayed beside the count line name. For every count zone, the current person occupancy
i.e. the number of persons currently located within the zone as well as the average dwelling
time of the last 15 minutes is shown. The displayed values are updated every 3 seconds.
If no valid dwell times of a zone have been measured in the past 15 minutes, the dwell
time of a count zone will be displayed as “n/a” (not available).