www.xolta.com
5
OTHER PRECAUTIONS:
The product should not be used for any purpose other than described in this manual.
An unpleasant smell can indicate electrolyte leakage from the battery cell(s). In this case, switch off the
system and contact your XOLTA system supplier immediately. Ventilate the room if possible and avoid
inhaling the odor.
The XOLTA Outdoor BESS is heavy. Suitable lifting equipment is necessary.
• Do not paint any part of the product.
For long term storage (longer than 1 month), the product should be charged to 40% SoC and then disconnected
from the grid. Observe warranty conditions.
The product must be disposed of in accordance with local regulations.
ACTIONS
in case of emergency situations
The XOLTA BAT-80 is designed to meet strict safety standards. It monitors essential parameters of the battery
system and protects the battery from damage. The main battery safety measures are presented in Table 2.1.
Table 2.1:
List of main safety
measures in XOLTA
Outdoor BESS
Despite all these built-in safety measures, emergency situations can still occur. In such emergencies, the
actions to take are as follows:
LEAKAGE
The battery pack might leak toxic electrolyte. Electrolyte is corrosive and odorous.
ACTION
• Avoid any contact with the leaking liquid or gas.
– In case of electrolyte
inhalation
- contact medical help.
– In case of electrolyte
contact with skin
- wash thoroughly with water and soap and contact medical
help.
– In case of electrolyte
contact with eyes
- rinse eyes with water for 15 minutes and contact medical
help.
– In case of electrolyte
ingestion
- force vomiting and contact medical help.
• Do not enter the room, if installed inside.
• Ventilate the room if possible.
• Contact your XOLTA system supplier.
State of the art battery cells with excellent safety performance
State of the art battery management system (BMS) ensuring over/under voltage and
over/under temperature monitoring for each individual battery cell
Redundant battery cut-off contactor controlled by BMS
Temperature sensors monitoring battery system temperature
Active battery current control depending on battery cells temperature, voltage and state
of charge (SoC)
System diagnostics, error handling and automatic grid connection/disconnection
controlled by the site controller
Battery air humidity monitoring and condensation prevention system
AC and DC protective fuses
