XMOS VocalFusion XVF3510, Руководство пользователя

Страница: 57 / 86

XM-014232-PC 57
COMMAND TYPE VALUE DESCRIPTION
NOTE
S
SET_LOCKER_DELAY_SETPOINT
_ENABLED
GET_LOCKER_DELAY_SETPOINT
_ENABLED
uint32 [0,1]
Set the delay setpoint enabled flag. When
enabled, if the fine-grain delay estimator is
unable to find the correct delay, then instead of
triggering a coarse-grain delay estimate it sets
the delay to a user defined value. This can
reduce recovery time after a delay change.
Before setting
SET_LOCKER_DELAY_SETPOINT_ENABLED
to 1, make sure that the delay value and
direction are set using
SET_LOCKER_DELAY_SETPOINT_SAMPLES
and
SET_LOCKER_DELAY_SETPOINT_DIRECTION
commands
0 - delay setpoint disabled (default)
1 - delay setpoint enabled
SET_LOCKER_DELAY_SETPOINT
_SAMPLES
GET_LOCKER_DELAY_SETPOINT
_SAMPLES
uint32 default: 0
Set the number of samples of delay that the
automatic fine-grain delay control sets if
SET_LOCKER_DELAY_SETPOINT_ENABLED is
set to 1, and the fine-grain estimator fails to
converge to a delay.
SET_LOCKER_DELAY_SETPOINT
_DIRECTION
GET_LOCKER_DELAY_SETPOINT
_DIRECTION
uint32
[0,1]
0 - delay the
Reference
input
(default)
1 - delay the
Mic input
Set the direction of input delay that the
automatic fine-grain delay control sets if
SET_LOCKER_DELAY_SETPOINT_ENABLED is
set to 1, and the fine-grain estimator fails to
converge to a delay.
GET_LOCKER_STATE STRING
Get the current state of automatic fine-grain
delay control state machine. Options are
“BOTH_WAIT”
“LOCKER_SEARCH”
“ADEC_TRIGGERED”
“DELAY_PROPAGATING
[A] When either of automatic coarse-grain or fine-grain delay control systems are enabled, this value
will be overwritten, therefore the SET commands should not be used. GET commands remain valid.
4.5.4. INTERFERENCE CANCELLER
The Interference Canceller (IC) suppresses static noise from point sources such as cooker hoods,
washing machines, or radios for which there is no reference audio signal available. When an internal
Voice Activity Detector (VAD) indicates the absence of voice, the IC adapts to remove noise from point
sources in the environment. When the VAD detects voice, the IC suspends adaptation which maintains
suppression of the interfering noise sources previously adapted to.
The IC only operates on the ASR channel from the pipeline output. The communications output channel
optionally has a beamformer which fixes a region of interest directly in front, perpendicular to the plane
of the two microphones.
The following table describes the configuration parameters for the Interference Canceller.