XD9010-TS Rev D 07/2008
10
Installation & Operation Manual
3. OPERATION
The XLT oven is a convection oven. It cooks foods by forcing hot air to circulate around the
food, thereby increasing the heat transfer rate. Convection ovens generally cook foods faster
than conventional ovens. The XLT oven models also have a conveyor that carries food
through the oven at a uniform rate. This helps eliminate under or over cooking food.
3.1. CONDENSED START-UP INSTRUCTIONS
3.1.1. FOR THE 1832-TS/TS2, 2440-TS/TS2, 3240-TS/TS2 AND 3255-TS/TS2
MODELS
1.
Turn the FAN switch ON (see Figure 5).
2.
Adjust the temperature controller set-point to the desired temperature
3.
(see Figure 6).
4.
Turn the BURNER switch ON (see Figure 5).
5.
Observe the indicated temperature for one minute. You should hear the burner ignite
and the temperature should rise after 30-45 seconds.
6.
If the burner does not ignite, turn the BURNER switch OFF, wait FIVE (5) minutes,
and repeat steps 3 & 4.
7.
Turn the CONVEYOR switch ON (see Figure 5).
8.
Adjust the conveyor controller to desired belt time (see Figure 6).
9.
Allow about 30 minutes for the oven to reach desired operating temperature.
This oven is not capable of being safely placed in operation in the event of a power
failure. No attempt should be made to operate this oven during power failure.
3.1.2. FOR THE 3270-TS/TS2 AND 3870-TS/TS2 MODELS
1.
Turn both LH & RH FAN switches ON (see Figure 5).
2.
Adjust both of the temperature controller set-points to the desired temperatures (see
Figure 6).
3.
Turn both the BURNER switches ON (see Figure 5).
4.
Observe the indicated temperature for one minute. You should hear the burners ignite
and both of the temperatures should rise after 30-45 seconds.
5.
If one or both of the burners do not ignite, turn one BURNER switch OFF, wait FIVE
(5) minutes, and repeat steps 3 & 4.
6.
Turn both of the CONVEYOR switches ON (see Figure 5).
7.
Adjust both of the conveyor controllers to desired belt times (see Figure 6).
8.
Allow about 30 minutes for the oven to reach desired operating temperature.
This oven is not capable of being safely placed in operation in the event of a power
failure. No attempt should be made to operate this oven during power failure.
Содержание XLT TS Series
Страница 15: ...XD9010 TS Rev D 07 2008 14 Installation Operation Manual ...
Страница 31: ...XD9010 TS Rev D 07 2008 30 Installation Operation Manual 8 2 3270 TS TS2 3870 TS TS2 LEFT HAND SIDE ...
Страница 32: ...XD9010 TS Rev D 7 2008 Installation Operation Manual 31 8 3 3270 TS TS2 3870 TS TS2 RIGHT HAND SIDE ...