StiX reverb is stereo, and its signal will always be
directed to the Main Stereo Bus output.
You can specify the amount of reverb for each drum
sound.
Reverb Predelay Time : Set the time before the reverberated signal occurs
Reverb Level : Set the output level of the Reverberation unit
Reverb Time : Set the length of the Reverb
Reverb HF Damp : Set the amount for damping ( Hi frequencies level fall )
Reverb Type : Use the three positions selector to choose your Reverb algorithm. The three Reverb algorithms are ( from bottom to
top) : Large, Medium and small
Delay Unit
Midi Sync Diode
: Click on this diode to sync the delay with the Midi
Clock of your Daw. Please note that the tempo will be displayed in
tempo values rather then in milliseconds.
Left Delay Time
: Set the delay time of the left delay line
Left Delay Feedback
: Set the amount of feedback of the left delay Line
Right Delay Time
: Set the delay time of the Right delay line
Right Delay Feedback
: Set the amount of feedback of the Right delay
Line
Phaser
: StiX Phaser emulates generic Stereo Analog Phasers models
Speed
: Set the rate of the phaser
Amount
: Set the amount of the phaser
Sweep
: Set the sweep width
Resonance
: Set the resonance factor
Stereo
: Controls the Stereo Width of the phaser unit. ( Full = Largest
stereo image )
28
