Xils lab PolyKB II, Руководство пользователя

Страница: 26 / 46

7.1.6.3 The Dropdown Matrix Modulation
The Second modulation section offers freely assignable sources and modulations. It is not hardwired
and is located at the bottom of the Main Modulation section
As stated before this particular Modulation Matrix allows both customs sources and destinations,
making it a very powerful sound design tool.
Lets see how it works in detail :
Two user selectable sources are available.
Source Menu : allows selecting two different sources via a drop down menu. The sources can be
chosen within a wide range of modules.
Available Modulation Sources :
Most sources like ADSR 1, 2, Velocity, Pressure ( After-touch), LFO1
and 2, or Mod Wheel are self-explanatory.
Seq Pitch means that the pitch of the note played by the PolySequencer
will determine the modulation. The Higher the note, the more
modulation. Same with Sequencer Velocity.
LFO 1 & 2 M means that you can use the LFO 1 and 2 in a Monophonic
mode. In such a mode the LFOs are the same for all the voices played, as
opposed to a Polyphonic LFO, where each note played triggers a new
instance of the LFO. Please note that you can combine Mono and Poly
incarnations of a LFO in the SAME patch, allowing both very subtle and
more straightforward LFO modulations simultaneously.
These two sources can then modulate up to four selectable Synth parameters.
Destination Menu : select which parameter source 1 or source 2 will modulate. The available
destinations can again be chosen from a wide range of module
- 26 -