background image

UG027 / PN 0402044 (v1.6) October 25, 2002

www.xilinx.com

Virtex-II Pro Prototype Platform User Guide

1-800-255-7778

"Xilinx" and the Xilinx logo shown above are registered trademarks of Xilinx, Inc. Any rights not expressly granted herein are reserved. 

CoolRunner, RocketChips, Rocket IP, Spartan, StateBENCH, StateCAD, Virtex, XACT, XC2064, XC3090, XC4005, and XC5210 are 
registered trademarks of Xilinx, Inc. 

The shadow X shown above is a trademark of Xilinx, Inc.

ACE Controller, ACE Flash, A.K.A. Speed, Alliance Series, AllianceCORE, Bencher, ChipScope, Configurable Logic Cell, CORE 
Generator, CoreLINX, Dual Block, EZTag, Fast CLK, Fast CONNECT, Fast FLASH, FastMap, Fast Zero Power, Foundation, Gigabit 
Speeds...and Beyond!, HardWire, HDL Bencher, IRL, J Drive, JBits, LCA, LogiBLOX, Logic Cell, LogiCORE, LogicProfessor, MicroBlaze, 
MicroVia, MultiLINX, NanoBlaze, PicoBlaze, PLUSASM, PowerGuide, PowerMaze, QPro, Real-PCI, Rocket I/O, SelectI/O, SelectRAM, 
Se, Silicon Xpresso, Smartguide, Smart-IP, SmartSearch, SMARTswitch, System ACE, Testbench In A Minute, TrueMap, UIM, 
VectorMaze, VersaBlock, VersaRing, Virtex-II Pro, Virtex-II EasyPath, Wave Table, WebFITTER, WebPACK, WebPOWERED, XABEL, 
XACT-Floorplanner, XACT-Performance, XACTstep Advanced, XACTstep Foundry,  XAM, XAPP, X-BLOX +, XC designated products, 
XChecker, XDM, XEPLD, Xilinx Foundation Series, Xilinx XDTV, Xinfo, XSI, XtremeDSP and ZERO+ are trademarks of Xilinx, Inc. 

The Programmable Logic Company is a service mark of Xilinx, Inc. 

All other trademarks are the property of their respective owners.

Xilinx, Inc. does not assume any liability arising out of the application or use of any product described or shown herein; nor does it convey 
any license under its patents, copyrights, or maskwork rights or any rights of others. Xilinx, Inc. reserves the right to make changes, at any 
time, in order to improve reliability, function or design and to supply the best product possible. Xilinx, Inc. will not assume responsibility for 
the use of any circuitry described herein other than circuitry entirely embodied in its products. Xilinx provides any design, code, or 
information shown or described herein "as is." By providing the design, code, or information as one possible implementation of a feature, 
application, or standard, Xilinx makes no representation that such implementation is free from any claims of infringement. You are 
responsible for obtaining any rights you may require for your implementation. Xilinx expressly disclaims any warranty whatsoever with 
respect to the adequacy of any such implementation, including but not limited to any warranties or representations that the implementation 
is free from claims of infringement, as well as any implied warranties of merchantability or fitness for a particular purpose. Xilinx, Inc. devices 
and products are protected under U.S. Patents. Other U.S. and foreign patents pending. Xilinx, Inc. does not represent that devices shown 
or products described herein are free from patent infringement or from any other third party right. Xilinx, Inc. assumes no obligation to 
correct any errors contained herein or to advise any user of this text of any correction if such be made. Xilinx, Inc. will not assume any 
liability for the accuracy or correctness of any engineering or software support or assistance provided to a user.

Xilinx products are not intended for use in life support appliances, devices, or systems. Use of a Xilinx product in such applications without 
the written consent of the appropriate Xilinx officer is prohibited.

The contents of this manual are owned and copyrighted by Xilinx. Copyright 1994-2002 Xilinx, Inc. All Rights Reserved. Except as stated 
herein, none of the material may be copied, reproduced, distributed, republished, downloaded, displayed, posted, or transmitted in any form 
or by any means including, but not limited to, electronic, mechanical, photocopying, recording, or otherwise, without the prior written consent 
of Xilinx. Any unauthorized use of any material contained in this manual may violate copyright laws, trademark laws, the laws of privacy and 
publicity, and communications regulations and statutes.

R

Содержание Virtex-II Pro































Отзывы: