Xilinx Virtex-II Pro, Руководство пользователя

Страница: 20 / 30

20 www.xilinx.com Virtex-II Pro Prototype Platform User Guide
1-800-255-7778 UG027 / PN 0402044 (v1.6) October 25, 2002
Chapter 1: Virtex-II Pro Prototype Platform
R
using BGA packages, do not apply pressure to the device while activating the socket.
Doing so can damage the socket and/or the device.
12. Pin Breakout
The pin breakout area is used to monitor or apply signals to each of the DUT pins. Headers
can be soldered to the breakout area to use with certain types of oscilloscope probes, for
either connecting function generators or wiring pins to the pin breakout area. Clocks in the
pin breakout area that connect to the DUT clock pads are shown in
Table 1-6 .
13. User LEDs (Active-High)
There are eight active-high user LEDs on the board. Before configuration, the LEDs reflect
the status of the configuration mode switch. During configuration, the LEDs are in a high-
impedance condition. After configuration, the LEDs are available to the user and reflect the
status of pins
D0-D7 (corresponding to LED 0- LED 7). The LED assignments are shown in
Table 1-7
14. Program Switch
The active-low program switch, when pressed, grounds the program pin on the DUT.
Table 1-6: Breakout Clock Pin Connections
FG456 FF672 FF1152
Label
Clock
Name Pin
Number
Clock
Name Pin
Number
Clock
Name Pin
Number
Breakout Area 1 GCLK3S V11 GCLK5S AC14 GCLK5S AJ18
Breakout Area 2 GCLK4P U11 GCLK3S AB13 GCLK3S AH17
Breakout Area 3 GCLK7P F11 GCLK1P D13 GCLK1P D17
Breakout Area 4 GCLK6S E11 GCLK0S E13 GCLK0S E17
Table 1-7: LED Assignments and Corresponding I/O
Pin Number For Package Type
LED After Configuration Status Pin FG456 FF672 FF1152
LED 0
Available as user LEDs
D0 V17 AB7 AG9
LED 1 D1 V16 AC7 AH9
LED 2 D2 W16 AA7 AK6
LED 3 D3 Y16 AA8 AK7
LED 4 D4 Y7 AA19 AK28
LED 5 D5 W7 AA20 AK29
LED 6 D6 V7 AC20 AH26
LED 7 D7 V6 AB20 AG26