Xilinx Virtex-6 FPGA Скачать руководство пользователя

Страница: 45 / 77

Virtex-6 FPGA Connectivity Kit Getting Started

www.xilinx.com

UG664 (v1.4) July 6, 2011

Modifying the Virtex-6 FPGA Targeted Reference Design

Software Modifications

This section describes how to modify the Windows driver and Linux driver software. This
exercise modifies the PCI Express vendor ID.

Windows Driver

To make software design changes, follow these steps:

Use the PC system on which the ML605 evaluation board is installed.

Copy the contents of the included USB stick into a local directory on this machine:

Navigate to the

v6_pcie_10Gdma_ddr3_xaui_axi/windows_driver/

xdma/

directory.

b. Edit the

xdma.inx

file.

Search for this string:

xdma_Inst

. Add the following entry for Windows XP:

%xdma.DRVDESC%= xdma_Inst, PCI\VEN_19aa&DEV_6042

d. With this change, the driver also supports a device with Vendor ID 19AA and

Device ID 6042. Save the changes and exit.

Recompile the drivers:

Windows driver compilation is done using Windows Device Driver Kit (WDK).
Prerequisite for this step is WDK installation. Download and install WDK
following the instructions available at:

http://www.microsoft.com/whdc/devtools/wdk/wdkpkg.mspx

b. After WDK installation, invoke the free build environment from

Start



All

Programs



Windows Driver Kit



WDK <version>



Build Environments



[Windows XP]

. This invokes the following window (

Figure 38

Compile DMA code: Navigate to the

windows_driver/xdma

directory and

execute this command:

build /w -ceZ

X-Ref Target - Figure 38

Figure 38:

Win WDK Build Environment

UG664_6

_052011

Содержание Virtex-6 FPGA














































































Результаты поиска

Содержание Virtex-6 FPGA

Отзывы:

Похожие инструкции для Virtex-6 FPGA

Бренды по названию

Популярные бренды

Xilinx Virtex-6 FPGA, Руководство по началу работы

Результаты поиска

Содержание Virtex-6 FPGA

Отзывы:

Похожие инструкции для Virtex-6 FPGA

Бренды по названию

Популярные бренды