manualshive.com logo in svg

Xilinx RocketIO, Руководство пользователя

Xilinx RocketIO - мощное устройство для передачи данных. Новейший User Manual доступен для загрузки бесплатно на manualshive.com. Руководство поможет вам максимально эффективно использовать продукт. Не упустите возможность скачать его прямо сейчас!

Поделиться
Скачать
background image

RocketIO™ Transceiver User Guide

www.xilinx.com

UG024 (v3.0) February 22, 2007

“Xilinx” and the Xilinx logo shown above are registered trademarks of Xilinx, Inc. Any rights not expressly granted herein are reserved. 

CoolRunner, RocketChips, Rocket IP, Spartan, StateBENCH, StateCAD, Virtex, XACT, XC2064, XC3090, XC4005, and XC5210 are 
registered trademarks of Xilinx, Inc. 

The shadow X shown above is a trademark of Xilinx, Inc.

ACE Controller, ACE Flash, A.K.A. Speed, Alliance Series, AllianceCORE, Bencher, ChipScope, Configurable Logic Cell, CORE Generator, 
CoreLINX, Dual Block, EZTag, Fast CLK, Fast CONNECT, Fast FLASH, FastMap, Fast Zero Power, Foundation, Gigabit Speeds...and 
Beyond!, HardWire, HDL Bencher, IRL, J Drive, JBits, LCA, LogiBLOX, Logic Cell, LogiCORE, LogicProfessor, MicroBlaze, MicroVia, 
MultiLINX, NanoBlaze, PicoBlaze, PLUSASM, PowerGuide, PowerMaze, QPro, Real-PCI, RocketIO, SelectIO, SelectRAM, Se, 
Silicon Xpresso, Smartguide, Smart-IP, SmartSearch, SMARTswitch, System ACE, Testbench In A Minute, TrueMap, UIM, VectorMaze, 
VersaBlock, VersaRing, Virtex-II Pro, Virtex-II EasyPath, Wave Table, WebFITTER, WebPACK, WebPOWERED, XABEL, XACT-
Floorplanner, XACT-Performance, XACTstep Advanced, XACTstep Foundry, XAM, XAPP, X-BLOX +, XC designated products, XChecker, 
XDM, XEPLD, Xilinx Foundation Series, Xilinx XDTV, Xinfo, XSI, XtremeDSP and ZERO+ are trademarks of Xilinx, Inc. 

The Programmable Logic Company is a service mark of Xilinx, Inc. 

All other trademarks are the property of their respective owners.

Xilinx, Inc. does not assume any liability arising out of the application or use of any product described or shown herein; nor does it convey 
any license under its patents, copyrights, or maskwork rights or any rights of others. Xilinx, Inc. reserves the right to make changes, at any 
time, in order to improve reliability, function or design and to supply the best product possible. Xilinx, Inc. will not assume responsibility for 
the use of any circuitry described herein other than circuitry entirely embodied in its products. Xilinx provides any design, code, or 
information shown or described herein “as is.” By providing the design, code, or information as one possible implementation of a feature, 
application, or standard, Xilinx makes no representation that such implementation is free from any claims of infringement. You are 
responsible for obtaining any rights you may require for your implementation. Xilinx expressly disclaims any warranty whatsoever with 
respect to the adequacy of any such implementation, including but not limited to any warranties or representations that the implementation 
is free from claims of infringement, as well as any implied warranties of merchantability or fitness for a particular purpose. Xilinx, Inc. devices 
and products are protected under U.S. Patents. Other U.S. and foreign patents pending. Xilinx, Inc. does not represent that devices shown 
or products described herein are free from patent infringement or from any other third party right. Xilinx, Inc. assumes no obligation to 
correct any errors contained herein or to advise any user of this text of any correction if such be made. Xilinx, Inc. will not assume any liability 
for the accuracy or correctness of any engineering or software support or assistance provided to a user.

Xilinx products are not intended for use in life support appliances, devices, or systems. Use of a Xilinx product in such applications without 
the written consent of the appropriate Xilinx officer is prohibited.

The contents of this manual are owned and copyrighted by Xilinx. Copyright 2001–2007 Xilinx, Inc. All Rights Reserved. Except as stated 
herein, none of the material may be copied, reproduced, distributed, republished, downloaded, displayed, posted, or transmitted in any form 
or by any means including, but not limited to, electronic, mechanical, photocopying, recording, or otherwise, without the prior written consent 
of Xilinx. Any unauthorized use of any material contained in this manual may violate copyright laws, trademark laws, the laws of privacy and 
publicity, and communications regulations and statutes.

R

Product Not Recommended for New Designs 

Содержание RocketIO





























































































































































Отзывы:

Нет отзывов

Похожие инструкции для RocketIO

Cambridge Audio Azur 640R Bedienungsanleitung preview
Azur 640R
Бренд: Cambridge Audio Страницы: 30
Cambridge Audio Azur 640R Supplementary Manual preview
Azur 640R
Бренд: Cambridge Audio Страницы: 9
Cambridge Audio Azur 540R V3 Service Manual preview
Azur 540R V3
Бренд: Cambridge Audio Страницы: 51
Cambridge Audio AZUR 840A V2 Manual preview
AZUR 840A V2
Бренд: Cambridge Audio Страницы: 55
E+E Elektronik EE210 Setup Manual preview
EE210
Бренд: E+E Elektronik Страницы: 2
Racing Electronics SWITCH Manual preview
SWITCH
Бренд: Racing Electronics Страницы: 2
Javad TRIUMPH-VS Instructions Manual preview
TRIUMPH-VS
Бренд: Javad Страницы: 10
Javad HPT404BT JL Configuration Example preview
HPT404BT JL
Бренд: Javad Страницы: 7
Javad JLink LTE How To Set Up preview
JLink LTE
Бренд: Javad Страницы: 4
Monacor JTS R-4/5 Instruction Manual preview
JTS R-4/5
Бренд: Monacor Страницы: 52
AMG AMG4744ER-SF Instruction Manual preview
AMG4744ER-SF
Бренд: AMG Страницы: 8
Uniden Bearcat BC 210XLT Operating Instructions Manual preview
Bearcat BC 210XLT
Бренд: Uniden Страницы: 10
GAMA Electronics RF24V1PR-ASL-NIS Instruction Manual preview
RF24V1PR-ASL-NIS
Бренд: GAMA Electronics Страницы: 4
Blaupunkt MIAMI620 Instruction Manual preview
MIAMI620
Бренд: Blaupunkt Страницы: 17
Raymarine Realvision RV-220P Installation Instructions Manual preview
Realvision RV-220P
Бренд: Raymarine Страницы: 24
Universal Remote Control COMPLETE CONTROL MRX-1 Installation Manual preview
COMPLETE CONTROL MRX-1
Бренд: Universal Remote Control Страницы: 27
Yaesu FT-101E Instruction Manual preview
FT-101E
Бренд: Yaesu Страницы: 42
Northern EOCCPK Manual preview
EOCCPK
Бренд: Northern Страницы: 4

Бренды по названию

Популярные бренды

Загрузить еще бренды