Xilinx RocketIO Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 156

Xilinx RocketIO Скачать руководство пользователя страница 32

32

RocketIO™ Transceiver User Guide

UG024 (v3.0) February 22, 2007

Chapter 1:

RocketIO Transceiver Overview

R

CRC_END_OF_PKT

NOTE:

This attribute is only valid when CRC_FORMAT = USER_MODE.

K28_0, K28_1, K28_2, K28_3, K28_4, K28_5, K28_6, K28_7, K23_7, K27_7,
K29_7, K30_7. End-of-packet (EOP) K-character for USER_MODE CRC.
Must be one of the 12 legal K-character values.

CRC_FORMAT

ETHERNET, INFINIBAND, FIBRE_CHAN, USER_MODE CRC algorithm
selection. Modifiable only for GT_AURORA_n, GT_XAUI_n, and
GT_CUSTOM. USER_MODE allows user definition of Start of Packet (SOP)
and End of Packet (EOP) K-characters.

CRC_START_OF_PKT

NOTE:

This attribute is only valid when CRC_FORMAT = USER_MODE.

K28_0, K28_1, K28_2, K28_3, K28_4, K28_5, K28_6, K28_7, K23_7, K27_7,
K29_7, K30_7. Start-of-packet (SOP) K-character for USER_MODE CRC.
Must be one of the twelve legal K-character values.

DEC_MCOMMA_DETECT

TRUE/FALSE controls the raising of per-byte flag RXCHARISCOMMA on
minus-comma.

DEC_PCOMMA_DETECT

TRUE/FALSE controls the raising of per-byte flag RXCHARISCOMMA on
plus-comma.

DEC_VALID_COMMA_ONLY

TRUE/FALSE controls the raising of RXCHARISCOMMA on an invalid
comma.

FALSE:

Raise RXCHARISCOMMA on:

0011111xxx

(if DEC_PCOMMA_DETECT is TRUE)

and/or on:

1100000xxx

(if DEC_MCOMMA_DETECT is TRUE)

regardless of the settings of the

xxx

bits.

TRUE:

Raise RXCHARISCOMMA only on valid characters that are in the

8B/10B translation.

MCOMMA_10B_VALUE

This 10-bit vector defines minus-comma for the purpose of raising
RXCOMMADET and realigning the serial bit stream byte boundary. This
definition does not affect 8B/10B encoding or decoding. Also see
COMMA_10B_MASK.

MCOMMA_DETECT

TRUE/FALSE indicates whether to raise or not raise RXCOMMADET when
minus-comma is detected.

PCOMMA_10B_VALUE

This 10-bit vector defines plus-comma for the purpose of raising
RXCOMMADET and realigning the serial bit stream byte boundary. This
definition does not affect 8B/10B encoding or decoding. Also see
COMMA_10B_MASK.

PCOMMA_DETECT

TRUE/FALSE indicates whether to raise or not raise RXCOMMADET when
plus-comma is detected.

REF_CLK_V_SEL

1/0

:

1:

Selects BREFCLK/BREFCLK2 for 2.5 Gb/s or greater serial speeds.

0:

Selects REFCLK/REFCLK2 for serial speeds under 2.5 Gb/s.

Table 1-6:

RocketIO Transceiver Attributes

(Continued)

Attribute

Description

Product Not Recommended for New Designs

«
...
30
31
32
33
34
...
»

Содержание RocketIO





























































































































































Отзывы:

Нет отзывов