Xilin CDDR, Руководство по эксплуатации, Страница: 49 / 60

45
14.1.4.2 Stability
The user should pay attention to section 6 of the code, which is about the stability of the truck
in the working conditions.
When operating correctly, the high lift truck accord with the section 6 is steady, but the incorrect
operating or the wrong maintenance could let the truck working unsteadily.
The factors that may influence the stability are: the condition of the ground and the floor,
gradient, speed, load, the weight of the storage battery, the dynamic force and the static force
as well as the judgment train conditions of the drivers.
When the truck is working in the condition differ to the regular working condition stated in the
section 6, should reduce the load.
When the truck mounted attachment working without load, it should be viewed as partial load.
14.1.4.3 The protection requirement and protection equipment
The truck should be painted with obvious color differing from the surrounding circumstance.
The driving type high –lift truck should be mounted with protection cabane, except for the
condition where the load could not drop onto the driver.
When convey the load maybe fall to the driver using high –lift truck, should adopt shielding
shelf with enough height, weight and the opening size is small enough to prevent the entire
load or part of them from falling onto the driver.
When it is necessary to denote the working condition, the truck should add caution device,
such as light or flash lamp.
In the permit of the factory, it is allowed to install turning hand hold on the steering wheel
formerly without it.
14.1.4.4 The transportation and storage of the fuel
The truck should refuel in the stated place. The fuel station should be ventilated, in order to
reduce the accumulation of the fuel gas to the least. In opening pit, subway entrance, and lift
well or other similar conditions nearby should not fill in the liquefied petroleum gas and replace
other dismountable liquefied petroleum gas container.
It is forbidden to smoke in the place of refuel, and should alarm using placard.
If the liquid fuel is not transport using pipeline, it should be transported using airtight container.
Only the personnel trained and appointed can fill or change the liquefied petroleum gas
container.
When store and transport the liquefied petroleum gas container, should fasten up the filling
valve, and the safety valve should connected to the vaporization room directly. When storing
the container, should screw the protective cap on the connection mouth.
Before filling and/or reusing, should inspect the container to ensure that it is vapor proof.
Especially pay attention to the valve and the connective part is vapor proof. The damaged
container should not be used. Only the permitted corporation could repair the liquefied
petroleum gas container.
14.1.4.5 The charging and changing of the battery
The battery charging station should set in the appointed area. The charging station should
prepare the equipment using for flushing and neutralizing the overflow electrolyte, the fire
control device, the measure avoiding the truck damage the charging device and the adequacy
ventilation facility blow away the fume off from the battery.
In the area of charging, it is forbidden to smoke and alarm with placard.
Only the personnel trained and permitted can change or charge the battery. The battery
repairing people should wear protective clothes.