Xilin CDDR, Руководство по эксплуатации, Страница: 29 / 60

25
9
． ． ． ．
9 Recommended working medium:
⑴
Hydraulic oil:
A. When it is normally loaded, we advise:
Hydraulic oil: LHPISOVG46, in accordance with standard DIN51524T.2, the average sustained
temperature should between 40 degrees to 60 degrees.
B. When it is over loaded, we advise:
Hydraulic oil: LHPISOVG68, in accordance with standard DIN51524T.2, the average sustained
temperature is above 60 degrees.
C. When it is lightly loaded with low temperature, we advise:
Hydraulic oil: HLPISOVG32, in accordance with standard DIN51524T.2, the average sustained
temperature is below 60 degrees.
D. At the occasion with variable loading, we advise:
All the working conditions mentioned above can use the hydraulic oil LHPISOVG46 in accordance
with standard DIN51524T.2 for replacement. The viscidity of this lubricant is very high (mostly used
hydraulic oil).
If it is difficult to buy hydraulic oil, SAE20W/20 engine oil can be used to substitute HLP68 hydraulic
oil.
⑵
Gear oil
：
Hyperbola gear oil 85W-90(GL-5)
⑶
Lubricating grease:
Lithium grease of type 3
All kinds of depleted hydraulic oil, gear oil and grease will pollute the environment. For this reason,
recycle the replaced working medium or treat according to local pertinent regulations
9
． ． ． ．
10 Maintenance period of consumables and partial parts:
Items Maintenance content Maintenance period Remarks
Bearings of fork
wheel
Replacement 1200 hours
Fork wheel Replacement 1200 hours
Seals Replacement 1200 hours
Replace when finding out
damage
Gear box Replacing lubricant grease 1000 hours
Hydraulic oil Replacement 1000 hours
High pressure oil
pipe
Replacement 2000 hours
Replace when finding out
damage
Strainer of hydraulic
reservoir
Cleaning 1000 hours
Driving motor
Check for carbon brushes and
bearings
1000 hours
Steering motor
Check for carbon brushes and
bearings
1000 hours
Oil pump motor
Check for carbon brushes and
bearings
1000 hours