Xilin CDDR, Руководство по эксплуатации, Страница: 16 / 60

12
10
）
The operator shall master the traveling speed according to site condition.The truck shall slow down
and move at a low speed when turning, at a narrow aisle, passing by swing doors or places where view
impeded. And the truck shall keep enough distance with the forklift moving forward. Abrupt stop, sharp
turn and overtaking are forbidden at dangerous places or where view is impeded except accidents. It is
forbidden hold body or hands out of the driving cabin.
11
）
Driver’s view during operation: The driver’s view must keep in the traveling direction of the stacker
and pay attention to the condition on driving roads at all times. If the goods carried impeding driver’s
view, goods carried must be adjusted to the backward of driver’s view. If the goods can not be adjusted,
another operator shall be arranged and walk by the stacker so as to report the forward road condition for
the truck driver.
12
）
Upgrade or downgrade driving: The route of upgrade and downsgrade shall be specified driving
roads. The ground shall be kept clean, safe and reliable in accordance with technical performance
of the stacker. When the truck is moving upgrade with goods, the forks should be kept in the forward
position. While drving downsgrade, the stacker shall move backward. Turning, tilting
driving and parking is not allowed during upgrade and downsgrade moving. Make sure to slow down
when downgrade drving and always make prepare for braking.
13
）
Driving the stacker to elevator or charging platform: When it is necessary to drive the stacker to
elevator or charging platform, make sure that elevator or charging platform has enough loading capacity,
with the design structure applicable for bearing stacker. Meanwhile the elevator and charging platform
should be permitted by the equipment user. Checks must be carried out before operation. Before driving
into the elevator, the goods should be carried into the elevator first and select the suitable parking space
for the truck in order to avoid collision with walls during lifting. When there is other person needs to use
the elevator, they should place the stacker at first.Then they can come into the elevator afterwards.
When the elevator reaches the specified height, the personnel shall get out of the elevator at first.
14
）
Conditions for goods to be transported: The stackor operator should checke the goods carefully make
sure that there is not any risk. Before transportation of the goods, place and locate the goods. If there is
any possibility of falling or overturning of the goods during transportation, it should be mounted with
protective devices (such as protective guard).
3
．
4 Important notice after operation:
1
）
Parking: Park the truck at appointed place. Never park the truck on slope.
Ensure the following points to be achieved before leaving away the truck:
a. Lay down the fork to the lowest position naturally.
b. Turn the steering wheel to the middle position.
c. Turn off the key switch.
2
）
Clean up the truck:
Notice
When cleaning up the electrical system, use compressed air but not
water.
3
）
Charge:
Warning
Open flame is forbidden to appear at the charge places, otherwise,
explosion or fire disaster can be caused.