Xicom XTS-200C, Руководство по эксплуатации и установке, Страница: 29 / 168

MNC-0200-004 5 of 14 Revision C
Safety/Sicherheit
Note — A procedure, technique, restriction, special interest, etc.,
that requires emphasis or consideration for the performance of a
procedural step or steps.
Note
This symbol denotes a NOTE in a procedural step. A
NOTE is used whenever emphasis or consideration
for the performance of a procedural step or steps is
necessary.
General Warnings and Cautions
High Voltage Hazards
WARNING
Some models of the Solid State ODU use external
fuses that utilize neutral fusing. Personnel servicing or
maintaining equipment should be thoroughly familiar
with safety precautions related to DOUBLE POLE/
NEUTRAL FUSING. Failure to comply could result in
serious injury or death.
WARNING
The Solid State ODU power amplifier is not equipped
with internal safety interlock switches. Turn OFF
primary power and disconnect power cord before
removing amplifier enclosure cover. Failure to comply
could result in serious injury or death.
WARNING
The power amplifier uses high voltage that may be
lethal if contacted. When the amplifier’s power supply
cover is removed multiple high voltage points are
exposed. Use extreme care when operating the
amplifier with the cover removed. Failure to comply
could result in serious injury or death.
WARNING
The AC Prime Power receptacle on the Solid State
ODU should be located close to a socket outlet and be