MNC-0300-021
15 of 20
Revision D
Unpacking and Installation, Rack SSPA
Summary Fault Indicators
Two sets of Form C relay contacts (Summary Fault 1 and Summary
Fault 2) are used to indicate that a fault has occurred.
The Summary Fault 1 indicator signals change state any time an
amplifier fault occurs. The user has the choice of a normally open or
normally closed circuit.
The Summary Fault 2 indicator signals change state any time a
summary fault occurs. The user has the choice of a normally open
or normally closed circuit.
Output Voltage
A + 24 VDC voltage is supplied that can deliver up to 100 mA. This
supply voltage is available on both Pins 1 and 2. The return for this
voltage is either Pin 9 or Pin 10.
