MNC-0300-021
10 of 20
Revision D
Unpacking and Installation, Rack SSPA
Rear Panel Interfaces
The rear panel (Figure 3) has all the connections required to use the
SSPA. Not all of the connections are used in every configuration. The rear
panel connections are:
•
RF Output
•
Waveguide Switch
•
Auxiliary Interface
•
COM1
•
COM2
•
Ethernet
•
RF Input
•
Prime Power Input
The AC Power Switch turns the AC power ON or OFF. If the AC power is
ON, the Power Supply AC ON Indicator Lamp will be lit.
The Amplifier ON Indicator LED on the power supply shows whether the
Power Switch on the front panel is ON or OFF. If the LED is lit, the front
panel power switch is ON and the DC output of the power supply is being
applied to the amplifier.
Figure 3, Rear Panel Connectors and Indicators
