MNC-0300-021
16 of 20
Revision D
Unpacking and Installation, Rack SSPA
Power and Interface Interconnections
When performing the procedures in this section refer to the Wiring
and Interconnect Drawings for your specific amplifier. These
drawings are located in the appendix titled
Interconnect Drawings
.
Prime Power Connections
The AC Prime Power receptacle (IEC-320 Connector) ) is located on
the amplifier rear panel. See the appendix titled
Specification
for
nominal line voltage and prime power connects. Figure 5 shows the
plug wiring diagram.
Figure 5, Power Plug Wiring Diagram
Serial Interface Ports
Dual serial interface connectors (COM1 and COM2), located on the
rear panel of the amplifier are available for remote control operation.
Both serial interface ports are always enabled. The amplifier will
respond to commands from either interface. The commands are
processed in the order received.
