10
How to Install
Remove Protective Coverings
Install the Side Brush and the Mop Assembly
Before using the robot vacuum, remove the protective strips from both
sides.
Install the side brush onto the clip on the bottom of the robot vacuum,
and then install the mop assembly into the mounting holes.
Side Brush Clip
Omni Station Buttons
Notes:
·
The buttons on the omni station will work only when the robot vacuum is
connected to the station.
·
Before cleaning or maintaining the cleaning tray and the omni station, remove the
robot vacuum from the omni station.
Press to make the robot vacuum leave the omni station.
Press to make the robot vacuum clean all areas.
Press to make the omni station start or stop drying the mop pads.
Leave Button
Clean Button
Dry Button
Mop Assembly
Mop Pad
Attachment Area
Mop Pad Holder
Mop Pad
