13
Sleep Mode
The robot vacuum will automatically enter sleep mode after it is paused
for 10 minutes, and its indicator will go out. To wake it up, press any
button on the robot vacuum.
Note:
If the sleep time exceeds 12 hours, the robot vacuum will be turned off
automatically.
Resume Cleanup
If the robot vacuum starts running low on battery during a cleaning task,
it will automatically return to the omni station to recharge. When the
robot vacuum is fully charged, it will resume cleanup where it left off.
Pause
When the robot vacuum is running, press any button to pause it.
Note:
Do not lift or move the robot vacuum while it is paused. Otherwise, it may have
navigation errors that could prevent the robot vacuum from returning to the omni
station or cause the loss of the map.
Turn On/Off
Press and hold the button for three seconds to turn on the robot
vacuum. The indicator is lit, and then the robot vacuum enters standby
mode. When the robot vacuum is paused and not being charged, press
and hold the button for three seconds to turn it off.
Note:
When the robot vacuum is charging, it will automatically turn on and cannot be
turned off.
Note:
When the child lock is enabled, the buttons on the robot vacuum and the omni
station will be locked.
Child Lock Settings
To enable or disable the child lock, press and hold the button on the
robot vacuum for three seconds.
When the robot vacuum is connected to the omni station,
simultaneously press and hold the buttons and on the omni station
for three seconds to enable or disable the child lock function. This
operation is not applicable during mop pad cleaning and dust emptying.
Update the Firmware
You can update the robot vacuum's firmware via the Mi Home/Xiaomi
Home app. Before updating, make sure the robot vacuum is on the omni
station and its battery level is more than 15%.
Restore Factory Settings
If the robot vacuum does not function properly after being restarted, you
can use a pin to press the reset button until you hear a voice to indicate
that the robot vacuum is restoring factory settings. This will reset the
robot vacuum to its original factory settings.
Restart the Robot Vacuum
If the robot vacuum stops responding or cannot be turned off, press and
hold the button for 15 seconds to forcefully turn it off. Then press and
hold the button for 3 seconds to turn the robot vacuum on.
