XIA Pixie-4 Express Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 76

XIA Pixie-4 Express Скачать руководство пользователя страница 6

PIXIE-4 User’s Manual

V2.69

©

XIA

2015. All rights reserved.

vi

5.

Install the Pixie-4 software provided by XIA (see section 2.2.3)

6.

Unless already installed, power down the host computer and install the Pixie-4 modules
in the chassis. Check the input jumper settings for the appropriate signal termination:
50 Ω or 5 kΩ (see section 10.1 for details). Then power up the system again (chassis
first).

7.

Windows will detect new hardware (the Pixie-4 modules) and should find the drivers
automatically. If not, direct it to the “drivers” directory in the Pixie-4 software
distribution installed in step 5. Verify in Window’s device manager that the modules
are properly installed as “PLX Custom (OEM) PCI 9054 Boards (32)” or “... (64)” and
have no “resource conflicts”. Currently, the driver must be version 6.5.0.

3

The

previously used driver version 4.1 will identify the modules as “Custom (OEM) PCI
9054 Boards” without the “PLX”

2.1.3 Pixie User Interface

The Pixie Viewer, XIA’s graphical user interface to set up and run the Pixie-4 modules, is based
on WaveMetrics’ IGOR Pro. To run the Pixie Viewer, you have to have IGOR Version 5.0 or
higher installed on your computer. By default, IGOR Pro will be installed at C:\Program
Files\WaveMetrics\IGOR Pro Folder.

The CD-ROM with the Pixie-4 software distribution contains

1.

an installation program Setup.exe,

2.

the Pixie-4 software in the folder XIA\Pixie4 and its subfolders.

The Pixie-4 software can be installed by running its installation program. Follow the
instructions shown on the screen to install the software to the default folder selected by the
installation program, or to a custom folder. This folder will contain the IGOR control program
(Pixie4.pxp), online help files and 8 subfolders (Configuration, Doc, Drivers, DSP, Firmware,
MCA, PixieClib, and PulseShape). Make sure you keep this folder organization intact, as the
IGOR program and future updates rely on this. Feel free, however, to add folders and
subfolders at your convenience.

For the latest version of the Pixie Viewer software, go to support.xia.com and search for “Pixie
release”.

2.2 Getting Started

To start the Pixie Viewer, double-click on the file “Pixie4.pxp” in the installation folder. After
IGOR loaded the Pixie Viewer, the S

TART

U

P

4

panel should be prominently displayed in the

middle of the desktop.

In the panel, first select the chassis type and number of Pixie-4 modules in the system. Then
specify the slot number in which each module resides.

3

For information on using the older PLX drivers (version 6.3.1) with Windows 2000, see the “readme” file in

the

Drivers

folder of the software distribution.

4

In the following, S

MALL

C

APS

are used for panel names;

italic

font is used for buttons and controls.

«
...
4
5
6
7
8
...
»

Содержание Pixie-4 Express













































































Отзывы:

Нет отзывов