8
CN3200 Dual Band Routing Modem - Installation Guide - G7604 - Release 1.0
The CN3200 Modem is a 2x4 MIMO device with four antenna connectors
— two Tx/Rx and two Rx-only.
All connectors are always used.
The CN3200 Modem is mounted directly to the back of the xMax 900 MHz panel antenna using
the supplied bracket.
If the recommended configuration is not used, CN3200 Modem should be placed as close as
possible to the antennas for optimum performance.
The antenna cable lengths should be as short as possible.
The installed 2.4 GHz antenna is separated from the main xMax antenna. It is mounted within
3 feet of the main unit and oriented in the same direction as the main 900 MHz antenna.
FOR OPTIMUM PERFORMANCE
Low-loss cables (LMR® 195/240 or equivalent) are highly recommended.
For additional information, please refer to the antenna configuration illustrations in the
Antenna
Configuration section on page
9
.
