19
CN3200 Dual Band Routing Modem - Installation Guide - G7604 - Release 1.0
12.
Secure the Ethernet cable to the grounded PoE Surge Protector.
13.
Install the supplied PoE++ Power Supply near the PoE Surge Protector.
14.
Using a short Ethernet cable, connect the PoE Surge Protector to the
Power plus Data (OUT) port on the PoE++ Power Supply.
15.
Connect the Ethernet cable from the customer premises to the Data (IN) port on the
PoE++ Power Supply.
16.
Attach two ferrite cores to the PoE Surge Protector end of the Ethernet cable, as shown in the
wiring diagram.
17.
Attach two ferrite cores to the device end of the Ethernet cable.
18.
Connect the Ethernet cable to the end user device (Wireless Access Point, Ethernet Switch, or
PC).
19.
Connect the supplied AC Power Cord to the PoE++ Power Supply and plug it into
a 110 VAC power source.
20.
If the CN3200 Modem is within range of an xMax Network, it connects within 2 minutes.
The CN3200 Dual Band Routing Modem is now fully functional.
