manualshive.com logo in svg

xFusion Digital Technologies FusionServer G8600 V7, Руководство пользователя

Поделиться
Скачать
xFusion Digital Technologies FusionServer G8600 V7 Скачать руководство пользователя страница 82

●

Do not carry the weight that is over the maximum load per person allowed by
local laws or regulations. Check the maximum device weight and arrange
required personnel.

●

Wear clean protective gloves, ESD clothing, a protective hat, and protective
shoes, as shown in 

Figure 8-1

.

Figure 8-1

 Protective clothing

●

Before touching a device, wear ESD clothing and gloves (or wrist strap), and
remove conductive objects (such as watches and jewelry). 

Figure 8-2

 shows

conductive objects that must be removed before you touch a device.

Figure 8-2

 Removing conductive objects

Figure 8-3

 shows how to wear an ESD wrist strap.

a.

Put your hands into the ESD wrist strap.

b.

Fasten the strap buckle and ensure that the ESD wrist strap is in contact
with your skin.

c.

Insert the ground terminal attached to the ESD wrist strap into the jack on
the grounded cabinet or chassis.

FusionServer G8600 V7 Server
Technical White Paper

8 Safety Instructions

Issue 03 (2023-09-15)

Copyright © xFusion Digital Technologies Co., Ltd.

75

Содержание FusionServer G8600 V7

















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды