xFusion Digital Technologies FusionServer G8600 V7 Скачать руководство пользователя страница 74

Страница: 74 / 112

Category

Specification

Network

OCP 3.0 NICs provide network expansion capabilities.
● One OCP 3.0 NIC, which can be configured as

required.

● Orderly hot swap.
● A variety of OCP 3.0 NICs are supported. For details,

see "Parts Compatibility" in

Compatibility Checker

I/O expansion

● The balanced configuration supports 13 PCIe slots.

One PCIe slot dedicated for an OCP 3.0 NIC and 12
standard PCIe slots.

● The high-performance configuration supports nine

PCIe slots.
Nine standard PCIe slots.

For details, see

NOTE

The preceding information is for reference only. For details, see
"OS and Parts Compatibility" in the

Compatibility Checker

Port

A variety of ports.
● Ports on the front panel:

– One USB Type-C iBMC direct connect

management port

– Two USB 3.0 ports
– One DB15 VGA port

● Ports on the rear panel:

– Two USB 3.0 ports
– One DB15 VGA port
– One RJ45 serial port
– One RJ45 management network port

NOTE

You are not advised to install the OS on the USB storage media.

Video card

An SM750 video chip with 32 MB display memory is
integrated on the BMC card. The maximum display
resolution is 1920 x 1200 at 60 Hz with 16M colors.

NOTE

● The integrated video card can provide the maximum display

resolution (1920 x 1200) only after the video card driver
matching the OS version is installed. Otherwise, only the
default resolution supported by the OS is provided.

● If both the front and rear VGA ports are connected to

monitors, only the monitor connected to the front VGA port
displays information.

FusionServer G8600 V7 Server
Technical White Paper

6 Product Specifications

Issue 03 (2023-09-15)

Содержание FusionServer G8600 V7

















































































































Результаты поиска

Содержание FusionServer G8600 V7

Отзывы:

Бренды по названию

Популярные бренды

xFusion Digital Technologies FusionServer G8600 V7, Руководство пользователя

Результаты поиска

Содержание FusionServer G8600 V7

Отзывы:

Бренды по названию

Популярные бренды