Xerox WorkCentre, Руководство пользователя

Страница: 494 / 720

Print WorkCentre
®
XXXX
494 User Guide
Use the Booklet Layout option to have the device automatically reduce and arrange the pages of
your original in the correct sequence to form a booklet when the pages are folded in half.
If your device is fitted with a Booklet Maker you can use the Booklet Finishing feature to
automatically produce folded and stapled booklets.
Note: This option must be made available by your System Administrator.
1. Open the document to be printed. From most applications select File , then select Print from
the file menu.
2. Enter the number of copies you want to produce. Depending on the application you are using
you may also be able to select a page range and make other print selections.
3. Select the Xerox driver from the list of print drivers available.
4. Select Xerox Features from the print driver properties menu - the name of the menu will vary
depending on the application you are printing from. From most applications select the
dropdown menu that states Copies and Pages, or that states the application name.
5. Select Booklet / Watermark from the Xerox features group selection menu.
6. Select Enabled from the Booklet Layout menu.
7. If required, click the Booklet Options button to specify options such as the paper size, margins,
gutter and creep.
• Select the booklet paper size required from the Scale to New Paper Size menu .
• Select Off to create the booklet using the paper size selected in your source document.
• Select Standard from the Booklet Margins menu to create a margin between each image
on your booklet.
• If required, select None to cancel any programming you have made.
• Select the Gutter entry box and use your keyboard to enter a width for the center margin
of your booklet.
• Select the Creep entry box and use your keyboard to enter an amount to shift the page
images outwards by. This feature compensates for the fact that the outer pages in a large
booklet have to fold around all the inner pages, this makes the outer pages slightly shorter
than the inner pages in the final booklet.
8. Click the OK button.
9. If required, check the Draw Page Borders checkbox to print a border around each image.
10. Select the confirmation button, the name will vary depending on the application you are
printing from. From most applications select the
OK
or
Print
button.
11. Collect your job from the device.
12. Press the Job Status button on the device control panel to view the job list and check the status
of the job.
13. Print jobs are usually shown in the Active Jobs list, however if your System Administrator has
enabled the Hold All Jobs feature, your job will be listed in either the Held Print Jobs or the
Unidentified Print Jobs list. To release a held job select the job in the required list and then
select the
Release button.
14. If your job remains held in the Active Jobs list, the device needs you to supply additional
resources, such as paper or staples before it can complete the job. To find out what resources
are needed, select the job and then select the
Details button. Once the resources are available
the job will print.
More Information
Printing a Document using the Mac Print Driver
System Administrator Guide www.xerox.com/support .