Xerox WorkCentre, Руководство пользователя

Страница: 157 / 720

Fax WorkCentre
®
XXXX
User Guide 157
Mailboxes are areas of device memory where incoming faxes are stored or from which outgoing
faxes can be polled (retrieved). Mailboxes enable you to store all received fax documents until it is
convenient to retrieve them, or store fax documents in a mailbox for polling.
Mailboxes are set up by your System Administrator, at least one mailbox must be set up before this
feature can be used. Up to 200 mailboxes can be set up. To receive faxes in your mailbox you must
give the sender your mailbox number. To retrieve a fax from your mailbox you must know your
mailbox number - you can also set a passcode for your mailbox.
Use a mailbox passcode to ensure fax documents are secure and can only be accessed by
authorised users. The passcode is a 4 digit number.
Note: If the mailbox has been set up with a passcode of 0000 then any combination of numbers,
including no numbers, can be entered as the passcode to gain access to the mailbox.
Note: Polling is where a fax is not sent to a recipient but is saved on the originating device. When
the recipient is ready to receive the fax they contact (poll) the device and request the fax.
Use the Store to a Local Mailbox option to save a document on your device, ready to be polled. The
document is stored in your mailbox and automatically sent to a remote fax machine when
requested.
1. Load your documents face up in the document feeder input tray. Adjust the guide to just touch
the documents.
Or
Lift up the document feeder. Place the document face down onto the document glass and
register it to the arrow at the top left corner. Close the document feeder.
2. Press the Clear All button on the control panel to cancel any previous programming selections.
3. Press the Services Home button.
4. Select the Fax button on the touch screen.
5. Select Fax Options tab.
6. Select the Mailboxes button.
7. Select the Store to Local Mailbox button.
8. Select the Mailbox Number entry field and enter the mailbox number, between 001 and 200.
9. If required, select the Mailbox Passcode entry field and enter the 4 digit mailbox passcode.
10. Select the OK button.
11. Press the Start button on the control panel to scan the original.
12. Remove the original from the document feeder or document glass when scanning has
completed.
13. Press the
Job Status
button on the device control panel to view the job list and check the status
of the job.
More Information
Sending a Fax to a Remote Mailbox (Embedded Fax)
Printing Faxes Stored in the Local Mailbox (Embedded Fax)
Deleting Faxes Stored in the Local Mailbox (Embedded Fax)
Using a User ID to Log In at the Device
Explaining the Fax Options
Using Internet Services to find System Administrator Contact Details
System Administrator Guide www.xerox.com/support .