Xerox WorkCentre Pro 575, Руководство по расширенным функциям

Страница: 111 / 327

Transmitting Documents
WorkCentre Pro 555/575 5-7
Direct Send with Memory Send Selected
When free memory becomes 0% due to many job reservations, a
Direct Send transmission can be performed manually even when the
default transmission mode is set to “Memory Send” (see “Memory
Send or Direct Send Default Mode” earlier in this Chapter).
To manually perform a Direct Send transmission:
1. Load the document face down in the Document Support.
2. Select the desired
Resolution and Contrast.
3. Press:
4. Press to send the document.
To return to the Standby Mode without sending the document,
press .
5. Using one of the dialing methods, enter the fax number and press
Enter, if needed.
The machine assigns, dials the number and transmits the pages as
they are scanned.
Note: If Direct Send is enabled, the document remains in the
Document Support until the document is transmitted.
Note: You can select another option for this job. Refer to the
selected option for the procedure.
Direct
Send
2.No
Direct send
1.Yes
Jan-31 02:23pm 80%
Enter fax number