Xerox WorkCentre 7228, Руководство системного администратора

Страница: 76 / 300

76
NetBIOS over IP Client/Server Printing
D4
Before You Start
1. Obtain the Print Driver for your workstation's operating system. Drivers are available on one of the
CD-ROMs that came with your Device. They are also typically available for downloading in self-
extracting Zip file format from the Internet at www.xerox.com.
2. Print a
Settings List
as stated under the
Network Connectivity Tab
of this guide.
3. On the Settings List,
verify that "SMB" is enabled
. Also,
verify that TCP/IP is enabled
as one of
the supported protocols (NetBEUI may also be displayed). To enable "SMB," if required, follow the
procedure stated under the Microsoft (NetBIOS over IP) item of the NOS Selection menu, accessed
from the
Network Connectivity Tab
of this guide.
4. The Workstation Print Driver Installation Procedures below ASSUME that you have already
Set Up
an NT Server to Queue Jobs to the Printer
. If you have NOT already set up the NT Server, for a
quick-step set up procedure, refer to the instructions supplied under the selection "Microsoft
(NetBIOS over IP)," located in the
NOS Selection
menu, under the
Network Connectivity Tab
of
this guide.
Windows 95/98/Me Workstation Print Driver Installation
Verify that the Correct Protocols and Services are installed in the workstation
1. At the Workstation's Desktop, right-click the
Network Neighborhood
icon ("My Network Places" in
Windows Me) and select
Properties
.
2. On the
Configuration Tab
, verify that
Client for Microsoft Networks
is installed. If it is NOT, click
the
Add
button, select
Client
, select
Add
, select
Client for Microsoft Networks
, and click
OK
. If the
setup program fails to find the required files, you will have to click
Have Disk…
to load the client from
the Operating System installer disk for this workstation.
3. On the
Configuration Tab
, verify that the TCP/IP protocol is installed. If it is NOT, click the
Add
button, select
Protocol
, select
Add
, select
TCP/IP Protocol
, and click
OK
. If the setup program fails
to find the required files, you will have to click
Have Disk…
to load the protocol from the Operating
System installer disk for this workstation.
4. Click the
Identification Tab
and verify that this workstation has a UNIQUE Computer Name (15
characters maximum) and is a member of a workgroup (Workgroup is the default Windows workgroup
name).