Xerox WorkCentre 7228, Руководство системного администратора

Страница: 24 / 300

24
Configuring SNMP Community Names with Internet Services
1. Open your Web browser and enter the TCP/IP address of the Device in the Address or Location field.
Press
Enter
.
2. Click the
Properties
Tab.
3. Click the plus symbol (+) to the left of the
Protocol Settings
file folder.
4. Select
SNMP
in the directory tree.
5. Enter a name for the
Community Name (Read-Only)
. This is the password for SNMP GET requests
from the SNMP Manager to the Agent in the Device.
6. Enter a name for the
Community Name (Read-Write)
. This is the password for SNMP SET
requests from the SNMP Manager to the Agent in the Device.
7.
Caution
: If you change the GET and/or SET Community Names, you must also change the names in
all network applications that are communicating by SNMP with this Device.
8. Enter a name for the
Community Name (Trap Notification)
. This is the default password for SNMP
TRAPS sent from the device to the Manager by SNMP.
9. Optionally enter the System Administrator's name for packet identification purposes.
10. Click
Apply
to accept the changes, or
Undo
to return the settings to their previous values.
Note: Changes to settings will not be applied until you restart the Device.