Installation and Setup
38
Xerox
®
WorkCentre
®
3615 Black and White Multifunction Printer
User Guide
3.
Locate the plastic latch release on the wireless network adapter that protrudes through the back of
the chassis.
4.
To remove the wireless network adapter, reach into the chassis and push inward, then back on the
latch release.
CAUTION:
Do not use force to pull on the wireless network adapter. If the latch is released properly,
the adapter pulls out easily. Pulling on the adapter can damage it.
5.
Close the left door, then on the back of the door, screw in the thumbscrew.
6.
Connect the printer to your computer with a USB cable or through the network using an Ethernet
cable.
7.
Turn on the printer.
Resetting Wireless Settings
If the printer was previously installed in a wireless network environment, it could retain setup and
configuration information.
To prevent the printer from attempting to connect to the previous network, reset the wireless settings.
For details on resetting or connecting to a wireless network, see the
System Administrator Guide
at
www.xerox.com/office/WC3615docs
.