Maintenance
142
Xerox
®
WorkCentre
®
3615 Black and White Multifunction Printer
User Guide
Adjusting the Fuser
Use Adjust Fuser for optimum print quality across a wide range of paper types. If the toner on a print is
smearing or can be rubbed off the paper, increase the offset for the paper you are using. If the toner is
blistered or mottled, decrease the offset for the paper you are using.
To adjust the fuser:
1.
At the printer control panel, press the
Machine Status
button.
2.
Touch
Tools
, then touch
Admin Settings
.
3.
Touch
Service Tools
.
4.
Touch
Adjust Fuser
.
5.
Touch the paper for the adjustment, touch (
-
) or (
+
), then touch
OK
.
Adjusting the Density
The Density Adjustment feature controls how much toner is used to print. Adjust the density for lighter
toner use for saving toner or heavier for making prints bolder. A positive adjustment makes the prints
darker, while a negative adjustment makes the prints lighter.You can also adjust it to compensate for
different paper types and thicknesses.
To adjust the density:
1.
At the printer control panel, press the
Machine Status
button.
2.
Touch
Tools
, then touch
Admin Settings
.
3.
Touch
Service Tools
.
4.
Touch
Adjust Density
.
5.
Touch the desired density from Darken to Lighten, then press
OK
.
Printing Charts
The Charts feature prints different charts that you can use to help diagnose printing issues.
To print a chart:
1.
At the printer control panel, press the
Machine Status
button.
2.
Touch
Tools
, then touch
Admin Settings
.
3.
Touch
Service Tools
.
4.
Touch
Chart
.