Maintenance
Xerox
®
WorkCentre® 3615 Black and White Multifunction Printer 143
User Guide
5.
Select an option:
−
Pitch Chart
: Prints a full page halftone chart and a pitch measuring chart that you can use as a
ruler to measure the distance between repeating defects. To identify the component causing
the defect, compare the halftone chart, or your print sample, against the measurements shown
on the chart.
−
Full Page Solid
: Prints a 1-sided or 2-sided solid black chart that you can use to observe density
variations.
−
Alignment Chart
: Prints an image alignment chart that you can use to check image alignment
on the page.
6.
Touch
.
Cleaning the Developer
The Clean Developer feature runs the developer motor and stirs the toner in the toner cartridge. Use
Clean Developer to clean toner from a cartridge just before changing it or to refresh the toner after
replacing a toner cartridge.
To clean the developers:
1.
At the printer control panel, press the
Machine Status
button.
2.
Touch
Tools
, then touch
Admin Settings
.
3.
Touch
Service Tools
.
4.
Touch
Clean Developer
.
5.
Touch
Start
.
The process runs automatically and can take three minutes to complete.
6.
The printer displays a message, then returns to the Services Home screen.
Cleaning the Transfer Unit
The Clean Transfer Unit feature allows you to start motors that clean the bias transfer roller. You can use
this feature if you observe toner on the back side of printed pages.
To clean the transfer unit:
1.
At the printer control panel, press the
Machine Status
button.
2.
Touch
Tools
, then touch
Admin Settings
.
3.
Touch
Service Tools
.
4.
Touch
Clean Transfer Unit
, then press
Start
.
The process runs automatically and can take three minutes to complete.
The printer displays a message, then returns to the Services Home screen.