Xerox WorkCentre 222, Руководство пользователя

Страница: 14 / 140

1-6
Before using the machine
Date en cours : 29 March 2005
C:\Documents and Settings\G092899\Bureau\MFF LU 252032677A WorkCentre222-228_Australie\01_front.fm
With specific regard to laser safety, the equipment complies with performance standards for laser
products set by government, national and international agencies as a Class 1 laser product. It does not
emit hazardous light, as the beam is totally enclosed during all phases of customer operation and
maintenance.
Operational safety information
To ensure the continued safe operation of your Fuji Xerox equipment, follow these safety guidelines at
all times.
Do these:
• Always connect equipment to a correctly grounded power outlet. If in doubt, have the outlet
checked by a qualified electrician.
Z
This equipment must be connected to a protective earth circuit.
This equipment is supplied with a plug that has a protective earth pin. This plug will fit only into
an earthed electrical outlet. This is a safety feature. To avoid risk of electric shock, contact your
electrician to replace the electrical outlet if you are unable to insert the plug into it. Never use a
plug that lacks an earth connection terminal to connect the product to an electrical outlet.
• Always follow all warnings and instructions that are marked on or supplied with the equipment.
• When moving the machine, be sure to unplug all cords including the power cord. And if using the
option duplex unit, be sure to remove it. If tilted, the machine may fall over and cause injuries.
• Always locate the equipment in an area that has adequate ventilation, and space for servicing.
• Always use materials and supplies specifically designed for your Fuji Xerox equipment. Use of
unsuitable materials may result in poor performance.
• Always unplug this equipment from the electrical outlet before cleaning.
• Make sure that you do not block the aeration grill located on the left side of the terminal. When
installing the terminal close to a wall, make sure that the distance between the wall and the rear,
and the wall and the left hand side of the terminal is at least 25 centimeters, to make opening of
the cover easier and so as not to block the aeration grill of the terminal. A poorly ventilated
machine can cause excessive internal heat and fire. The accompanying diagram shows the mini-
mum clearances required for normal operation, consumables replacement, and maintenance to
ensure your machine operates at peak performance. Your Xerox representative
will provide nec-
essary support for the proper installation of the machine.