Xerox Wide Format 6050, Руководство пользователя

Страница: 286 / 304

FP Fills in a polygon registered in the polygon buffer. y y y
FR Feeds paper by one frame for long-axis plotting.
[Interpreted as output trigger] y y y*
FS Specifies the pen pressure. y n
FT Specifies a fill type. y y y
GC Sets a group count. y n
GM Allocates the graphics memory. y n
GP Groups specified pens. y n
IM
Sets each mask. y y
IN Initializes the printer. y y y
IP
Sets a scaling point. y y y
IR Establishes the positions of P1 and P2 about hard clip
limits. y y
IV
Selects a character set from a slot. y n
IW Sets a software window area. y y y
KY
Assigns a function key on the front panel to a specific
function. y n
LA Specifies the line end and joint styles. y y
LB Draws a character string. y y y
LM Sets the label mode to one or two bytes. y y
LO
Specifies a character drawing position. y y y
LT Specifies a line pattern (
–
7 to +6) for line plotting. y y y
MC Controls the pixel color when two or more graphics
intersect. y n
MG
Displays a message on the control panel of the
printer. y n
MT Indicates the type of paper loaded on the printer. y y
NP
Sets the HPGL/2 palette size. y y
NR: Sets the printer to local. [Interpreted as output trigger] y y y*
OA
Outputs the current position on the printer coordinate
system and the pen up-down information. y y
Com-
mand
Command Meaning and action HP-GL HP-GL/2
6030/6050
Wide Format